diff --git a/roles/base/files/ssh/sshd_config.18 b/roles/base/files/ssh/sshd_config.18 deleted file mode 100644 index 080de0d1ca..0000000000 --- a/roles/base/files/ssh/sshd_config.18 +++ /dev/null @@ -1,151 +0,0 @@ -# $OpenBSD: sshd_config,v 1.89 2013/02/06 00:20:42 dtucker Exp $ - -# This is the sshd server system-wide configuration file. See -# sshd_config(5) for more information. - -# This sshd was compiled with PATH=/usr/local/bin:/usr/bin - -# The strategy used for options in the default sshd_config shipped with -# OpenSSH is to specify options with their default value where -# possible, but leave them commented. Uncommented options override the -# default value. - -# If you want to change the port on a SELinux system, you have to tell -# SELinux about this change. -# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER -# -#Port 22 -#AddressFamily any -#ListenAddress 0.0.0.0 -#ListenAddress :: - -# The default requires explicit activation of protocol 1 -#Protocol 2 - -# HostKey for protocol version 1 -#HostKey /etc/ssh/ssh_host_key -# HostKeys for protocol version 2 -#HostKey /etc/ssh/ssh_host_rsa_key -#HostKey /etc/ssh/ssh_host_dsa_key -#HostKey /etc/ssh/ssh_host_ecdsa_key - -# Lifetime and size of ephemeral version 1 server key -#KeyRegenerationInterval 1h -#ServerKeyBits 1024 - -# Logging -# obsoletes QuietMode and FascistLogging -#SyslogFacility AUTH -SyslogFacility AUTHPRIV -#LogLevel INFO - -# Authentication: - -#LoginGraceTime 2m -PermitRootLogin without-password -StrictModes yes -PasswordAuthentication no - -#MaxAuthTries 6 -#MaxSessions 10 - -#RSAAuthentication yes -#PubkeyAuthentication yes - -# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2 -# but this is overridden so installations will only check .ssh/authorized_keys -AuthorizedKeysFile .ssh/authorized_keys - -#AuthorizedPrincipalsFile none - -#AuthorizedKeysCommand none -#AuthorizedKeysCommandUser nobody - -# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -#RhostsRSAAuthentication no -# similar for protocol version 2 -#HostbasedAuthentication no -# Change to yes if you don't trust ~/.ssh/known_hosts for -# RhostsRSAAuthentication and HostbasedAuthentication -#IgnoreUserKnownHosts no -# Don't read the user's ~/.rhosts and ~/.shosts files -#IgnoreRhosts yes - -# Change to no to disable s/key passwords -#ChallengeResponseAuthentication yes -ChallengeResponseAuthentication no - -# Kerberos options -#KerberosAuthentication no -#KerberosOrLocalPasswd yes -#KerberosTicketCleanup yes -#KerberosGetAFSToken no -#KerberosUseKuserok yes - -# GSSAPI options -#GSSAPIAuthentication no -GSSAPIAuthentication yes -#GSSAPICleanupCredentials yes -GSSAPICleanupCredentials yes -#GSSAPIStrictAcceptorCheck yes -#GSSAPIKeyExchange no - -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will -# be allowed through the ChallengeResponseAuthentication and -# PasswordAuthentication. Depending on your PAM configuration, -# PAM authentication via ChallengeResponseAuthentication may bypass -# the setting of "PermitRootLogin without-password". -# If you just want the PAM account and session checks to run without -# PAM authentication, then enable this but set PasswordAuthentication -# and ChallengeResponseAuthentication to 'no'. -# WARNING: 'UsePAM no' is not supported in Fedora and may cause several -# problems. -#UsePAM no -UsePAM yes - -#AllowAgentForwarding yes -#AllowTcpForwarding yes -#GatewayPorts no -#X11Forwarding no -X11Forwarding yes -#X11DisplayOffset 10 -#X11UseLocalhost yes -#PrintMotd yes -#PrintLastLog yes -#TCPKeepAlive yes -#UseLogin no -UsePrivilegeSeparation sandbox # Default for new installations. -#PermitUserEnvironment no -#Compression delayed -#ClientAliveInterval 0 -#ClientAliveCountMax 3 -#ShowPatchLevel no -#UseDNS yes -#PidFile /var/run/sshd.pid -#MaxStartups 10:30:100 -#PermitTunnel no -#ChrootDirectory none -#VersionAddendum none - -# no default banner path -#Banner none - -# Accept locale-related environment variables -AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES -AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT -AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE -AcceptEnv XMODIFIERS - -# override default of no subsystems -Subsystem sftp /usr/libexec/openssh/sftp-server - -# Uncomment this if you want to use .local domain -#Host *.local -# CheckHostIP no - -# Example of overriding settings on a per-user basis -#Match User anoncvs -# X11Forwarding no -# AllowTcpForwarding no -# ForceCommand cvs server diff --git a/roles/base/files/ssh/sshd_config.arm-releng b/roles/base/files/ssh/sshd_config.arm-releng deleted file mode 100644 index da5f79fcdc..0000000000 --- a/roles/base/files/ssh/sshd_config.arm-releng +++ /dev/null @@ -1,138 +0,0 @@ -# $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ - -# This is the sshd server system-wide configuration file. See -# sshd_config(5) for more information. - -# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin - -# The strategy used for options in the default sshd_config shipped with -# OpenSSH is to specify options with their default value where -# possible, but leave them commented. Uncommented options change a -# default value. - -#Port 22 -#AddressFamily any -#ListenAddress 0.0.0.0 -#ListenAddress :: - -# Disable legacy (protocol version 1) support in the server for new -# installations. In future the default will change to require explicit -# activation of protocol 1 -Protocol 2 - -# HostKey for protocol version 1 -#HostKey /etc/ssh/ssh_host_key -# HostKeys for protocol version 2 -#HostKey /etc/ssh/ssh_host_rsa_key -#HostKey /etc/ssh/ssh_host_dsa_key - -# Lifetime and size of ephemeral version 1 server key -#KeyRegenerationInterval 1h -#ServerKeyBits 1024 - -# Logging -# obsoletes QuietMode and FascistLogging -#SyslogFacility AUTH -SyslogFacility AUTHPRIV -LogLevel VERBOSE - -# Authentication: - -#LoginGraceTime 2m -#PermitRootLogin yes -StrictModes no -#MaxAuthTries 6 -#MaxSessions 10 - -#RSAAuthentication yes -#PubkeyAuthentication yes -#AuthorizedKeysFile .ssh/authorized_keys -#AuthorizedKeysCommand none -#AuthorizedKeysCommandRunAs nobody - -# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -#RhostsRSAAuthentication no -# similar for protocol version 2 -#HostbasedAuthentication no -# Change to yes if you don't trust ~/.ssh/known_hosts for -# RhostsRSAAuthentication and HostbasedAuthentication -#IgnoreUserKnownHosts no -# Don't read the user's ~/.rhosts and ~/.shosts files -#IgnoreRhosts yes - -# To disable tunneled clear text passwords, change to no here! -#PasswordAuthentication yes -#PermitEmptyPasswords no -PasswordAuthentication yes - -# Change to no to disable s/key passwords -#ChallengeResponseAuthentication yes -ChallengeResponseAuthentication no - -# Kerberos options -#KerberosAuthentication no -#KerberosOrLocalPasswd yes -#KerberosTicketCleanup yes -#KerberosGetAFSToken no -#KerberosUseKuserok yes - -# GSSAPI options -#GSSAPIAuthentication no -GSSAPIAuthentication yes -#GSSAPICleanupCredentials yes -GSSAPICleanupCredentials yes -#GSSAPIStrictAcceptorCheck yes -#GSSAPIKeyExchange no - -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will -# be allowed through the ChallengeResponseAuthentication and -# PasswordAuthentication. Depending on your PAM configuration, -# PAM authentication via ChallengeResponseAuthentication may bypass -# the setting of "PermitRootLogin without-password". -# If you just want the PAM account and session checks to run without -# PAM authentication, then enable this but set PasswordAuthentication -# and ChallengeResponseAuthentication to 'no'. -#UsePAM no -UsePAM yes - -# Accept locale-related environment variables -AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES -AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT -AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE -AcceptEnv XMODIFIERS - -#AllowAgentForwarding yes -#AllowTcpForwarding yes -#GatewayPorts no -#X11Forwarding no -X11Forwarding yes -#X11DisplayOffset 10 -#X11UseLocalhost yes -#PrintMotd yes -#PrintLastLog yes -#TCPKeepAlive yes -#UseLogin no -#UsePrivilegeSeparation yes -#PermitUserEnvironment no -#Compression delayed -#ClientAliveInterval 0 -#ClientAliveCountMax 3 -#ShowPatchLevel no -#UseDNS yes -#PidFile /var/run/sshd.pid -#MaxStartups 10 -#PermitTunnel no -#ChrootDirectory none - -# no default banner path -#Banner none - -# override default of no subsystems -Subsystem sftp /usr/libexec/openssh/sftp-server - -# Example of overriding settings on a per-user basis -#Match User anoncvs -# X11Forwarding no -# AllowTcpForwarding no -# ForceCommand cvs server diff --git a/roles/base/files/ssh/sshd_config.f18 b/roles/base/files/ssh/sshd_config.f18 deleted file mode 100644 index 080de0d1ca..0000000000 --- a/roles/base/files/ssh/sshd_config.f18 +++ /dev/null @@ -1,151 +0,0 @@ -# $OpenBSD: sshd_config,v 1.89 2013/02/06 00:20:42 dtucker Exp $ - -# This is the sshd server system-wide configuration file. See -# sshd_config(5) for more information. - -# This sshd was compiled with PATH=/usr/local/bin:/usr/bin - -# The strategy used for options in the default sshd_config shipped with -# OpenSSH is to specify options with their default value where -# possible, but leave them commented. Uncommented options override the -# default value. - -# If you want to change the port on a SELinux system, you have to tell -# SELinux about this change. -# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER -# -#Port 22 -#AddressFamily any -#ListenAddress 0.0.0.0 -#ListenAddress :: - -# The default requires explicit activation of protocol 1 -#Protocol 2 - -# HostKey for protocol version 1 -#HostKey /etc/ssh/ssh_host_key -# HostKeys for protocol version 2 -#HostKey /etc/ssh/ssh_host_rsa_key -#HostKey /etc/ssh/ssh_host_dsa_key -#HostKey /etc/ssh/ssh_host_ecdsa_key - -# Lifetime and size of ephemeral version 1 server key -#KeyRegenerationInterval 1h -#ServerKeyBits 1024 - -# Logging -# obsoletes QuietMode and FascistLogging -#SyslogFacility AUTH -SyslogFacility AUTHPRIV -#LogLevel INFO - -# Authentication: - -#LoginGraceTime 2m -PermitRootLogin without-password -StrictModes yes -PasswordAuthentication no - -#MaxAuthTries 6 -#MaxSessions 10 - -#RSAAuthentication yes -#PubkeyAuthentication yes - -# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2 -# but this is overridden so installations will only check .ssh/authorized_keys -AuthorizedKeysFile .ssh/authorized_keys - -#AuthorizedPrincipalsFile none - -#AuthorizedKeysCommand none -#AuthorizedKeysCommandUser nobody - -# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -#RhostsRSAAuthentication no -# similar for protocol version 2 -#HostbasedAuthentication no -# Change to yes if you don't trust ~/.ssh/known_hosts for -# RhostsRSAAuthentication and HostbasedAuthentication -#IgnoreUserKnownHosts no -# Don't read the user's ~/.rhosts and ~/.shosts files -#IgnoreRhosts yes - -# Change to no to disable s/key passwords -#ChallengeResponseAuthentication yes -ChallengeResponseAuthentication no - -# Kerberos options -#KerberosAuthentication no -#KerberosOrLocalPasswd yes -#KerberosTicketCleanup yes -#KerberosGetAFSToken no -#KerberosUseKuserok yes - -# GSSAPI options -#GSSAPIAuthentication no -GSSAPIAuthentication yes -#GSSAPICleanupCredentials yes -GSSAPICleanupCredentials yes -#GSSAPIStrictAcceptorCheck yes -#GSSAPIKeyExchange no - -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will -# be allowed through the ChallengeResponseAuthentication and -# PasswordAuthentication. Depending on your PAM configuration, -# PAM authentication via ChallengeResponseAuthentication may bypass -# the setting of "PermitRootLogin without-password". -# If you just want the PAM account and session checks to run without -# PAM authentication, then enable this but set PasswordAuthentication -# and ChallengeResponseAuthentication to 'no'. -# WARNING: 'UsePAM no' is not supported in Fedora and may cause several -# problems. -#UsePAM no -UsePAM yes - -#AllowAgentForwarding yes -#AllowTcpForwarding yes -#GatewayPorts no -#X11Forwarding no -X11Forwarding yes -#X11DisplayOffset 10 -#X11UseLocalhost yes -#PrintMotd yes -#PrintLastLog yes -#TCPKeepAlive yes -#UseLogin no -UsePrivilegeSeparation sandbox # Default for new installations. -#PermitUserEnvironment no -#Compression delayed -#ClientAliveInterval 0 -#ClientAliveCountMax 3 -#ShowPatchLevel no -#UseDNS yes -#PidFile /var/run/sshd.pid -#MaxStartups 10:30:100 -#PermitTunnel no -#ChrootDirectory none -#VersionAddendum none - -# no default banner path -#Banner none - -# Accept locale-related environment variables -AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES -AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT -AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE -AcceptEnv XMODIFIERS - -# override default of no subsystems -Subsystem sftp /usr/libexec/openssh/sftp-server - -# Uncomment this if you want to use .local domain -#Host *.local -# CheckHostIP no - -# Example of overriding settings on a per-user basis -#Match User anoncvs -# X11Forwarding no -# AllowTcpForwarding no -# ForceCommand cvs server diff --git a/roles/base/files/ssh/sshd_config.f19 b/roles/base/files/ssh/sshd_config.f19 deleted file mode 100644 index 080de0d1ca..0000000000 --- a/roles/base/files/ssh/sshd_config.f19 +++ /dev/null @@ -1,151 +0,0 @@ -# $OpenBSD: sshd_config,v 1.89 2013/02/06 00:20:42 dtucker Exp $ - -# This is the sshd server system-wide configuration file. See -# sshd_config(5) for more information. - -# This sshd was compiled with PATH=/usr/local/bin:/usr/bin - -# The strategy used for options in the default sshd_config shipped with -# OpenSSH is to specify options with their default value where -# possible, but leave them commented. Uncommented options override the -# default value. - -# If you want to change the port on a SELinux system, you have to tell -# SELinux about this change. -# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER -# -#Port 22 -#AddressFamily any -#ListenAddress 0.0.0.0 -#ListenAddress :: - -# The default requires explicit activation of protocol 1 -#Protocol 2 - -# HostKey for protocol version 1 -#HostKey /etc/ssh/ssh_host_key -# HostKeys for protocol version 2 -#HostKey /etc/ssh/ssh_host_rsa_key -#HostKey /etc/ssh/ssh_host_dsa_key -#HostKey /etc/ssh/ssh_host_ecdsa_key - -# Lifetime and size of ephemeral version 1 server key -#KeyRegenerationInterval 1h -#ServerKeyBits 1024 - -# Logging -# obsoletes QuietMode and FascistLogging -#SyslogFacility AUTH -SyslogFacility AUTHPRIV -#LogLevel INFO - -# Authentication: - -#LoginGraceTime 2m -PermitRootLogin without-password -StrictModes yes -PasswordAuthentication no - -#MaxAuthTries 6 -#MaxSessions 10 - -#RSAAuthentication yes -#PubkeyAuthentication yes - -# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2 -# but this is overridden so installations will only check .ssh/authorized_keys -AuthorizedKeysFile .ssh/authorized_keys - -#AuthorizedPrincipalsFile none - -#AuthorizedKeysCommand none -#AuthorizedKeysCommandUser nobody - -# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -#RhostsRSAAuthentication no -# similar for protocol version 2 -#HostbasedAuthentication no -# Change to yes if you don't trust ~/.ssh/known_hosts for -# RhostsRSAAuthentication and HostbasedAuthentication -#IgnoreUserKnownHosts no -# Don't read the user's ~/.rhosts and ~/.shosts files -#IgnoreRhosts yes - -# Change to no to disable s/key passwords -#ChallengeResponseAuthentication yes -ChallengeResponseAuthentication no - -# Kerberos options -#KerberosAuthentication no -#KerberosOrLocalPasswd yes -#KerberosTicketCleanup yes -#KerberosGetAFSToken no -#KerberosUseKuserok yes - -# GSSAPI options -#GSSAPIAuthentication no -GSSAPIAuthentication yes -#GSSAPICleanupCredentials yes -GSSAPICleanupCredentials yes -#GSSAPIStrictAcceptorCheck yes -#GSSAPIKeyExchange no - -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will -# be allowed through the ChallengeResponseAuthentication and -# PasswordAuthentication. Depending on your PAM configuration, -# PAM authentication via ChallengeResponseAuthentication may bypass -# the setting of "PermitRootLogin without-password". -# If you just want the PAM account and session checks to run without -# PAM authentication, then enable this but set PasswordAuthentication -# and ChallengeResponseAuthentication to 'no'. -# WARNING: 'UsePAM no' is not supported in Fedora and may cause several -# problems. -#UsePAM no -UsePAM yes - -#AllowAgentForwarding yes -#AllowTcpForwarding yes -#GatewayPorts no -#X11Forwarding no -X11Forwarding yes -#X11DisplayOffset 10 -#X11UseLocalhost yes -#PrintMotd yes -#PrintLastLog yes -#TCPKeepAlive yes -#UseLogin no -UsePrivilegeSeparation sandbox # Default for new installations. -#PermitUserEnvironment no -#Compression delayed -#ClientAliveInterval 0 -#ClientAliveCountMax 3 -#ShowPatchLevel no -#UseDNS yes -#PidFile /var/run/sshd.pid -#MaxStartups 10:30:100 -#PermitTunnel no -#ChrootDirectory none -#VersionAddendum none - -# no default banner path -#Banner none - -# Accept locale-related environment variables -AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES -AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT -AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE -AcceptEnv XMODIFIERS - -# override default of no subsystems -Subsystem sftp /usr/libexec/openssh/sftp-server - -# Uncomment this if you want to use .local domain -#Host *.local -# CheckHostIP no - -# Example of overriding settings on a per-user basis -#Match User anoncvs -# X11Forwarding no -# AllowTcpForwarding no -# ForceCommand cvs server diff --git a/roles/base/files/ssh/sshd_config.releng b/roles/base/files/ssh/sshd_config.releng index da5f79fcdc..996c262579 100644 --- a/roles/base/files/ssh/sshd_config.releng +++ b/roles/base/files/ssh/sshd_config.releng @@ -1,4 +1,4 @@ -# $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ +# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -11,24 +11,21 @@ # default value. #Port 22 +#Protocol 2,1 +Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: -# Disable legacy (protocol version 1) support in the server for new -# installations. In future the default will change to require explicit -# activation of protocol 1 -Protocol 2 - # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 -#HostKey /etc/ssh/ssh_host_rsa_key +HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h -#ServerKeyBits 1024 +#ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging @@ -39,16 +36,13 @@ LogLevel VERBOSE # Authentication: #LoginGraceTime 2m -#PermitRootLogin yes -StrictModes no +PermitRootLogin without-password +StrictModes yes #MaxAuthTries 6 -#MaxSessions 10 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys -#AuthorizedKeysCommand none -#AuthorizedKeysCommandRunAs nobody # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no @@ -63,7 +57,7 @@ StrictModes no # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no -PasswordAuthentication yes +PasswordAuthentication no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes @@ -74,36 +68,32 @@ ChallengeResponseAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no -#KerberosUseKuserok yes # GSSAPI options #GSSAPIAuthentication no -GSSAPIAuthentication yes +GSSAPIAuthentication no #GSSAPICleanupCredentials yes -GSSAPICleanupCredentials yes -#GSSAPIStrictAcceptorCheck yes -#GSSAPIKeyExchange no +GSSAPICleanupCredentials no # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will -# be allowed through the ChallengeResponseAuthentication and -# PasswordAuthentication. Depending on your PAM configuration, -# PAM authentication via ChallengeResponseAuthentication may bypass -# the setting of "PermitRootLogin without-password". -# If you just want the PAM account and session checks to run without -# PAM authentication, then enable this but set PasswordAuthentication -# and ChallengeResponseAuthentication to 'no'. +# be allowed through the ChallengeResponseAuthentication mechanism. +# Depending on your PAM configuration, this may bypass the setting of +# PasswordAuthentication, PermitEmptyPasswords, and +# "PermitRootLogin without-password". If you just want the PAM account and +# session checks to run without PAM authentication, then enable this but set +# ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables -AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES -AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT -AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE -AcceptEnv XMODIFIERS - -#AllowAgentForwarding yes +AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES +AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT +AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes +AllowTcpForwarding yes + + #GatewayPorts no #X11Forwarding no X11Forwarding yes @@ -122,17 +112,10 @@ X11Forwarding yes #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 -#PermitTunnel no -#ChrootDirectory none +PermitTunnel no # no default banner path -#Banner none +#Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server - -# Example of overriding settings on a per-user basis -#Match User anoncvs -# X11Forwarding no -# AllowTcpForwarding no -# ForceCommand cvs server