Pavel Raiskup
a2d65ff508
Move devel servers to elastic IPs, too
2021-01-18 14:58:58 +01:00
Pavel Raiskup
f14b897b1f
copr: point playbooks to new set of (elastic) IPs
2020-11-13 10:05:21 +01:00
Jakub Kadlcik
e043b62c5a
reprovisioning copr-fe-dev from a new instance
2020-11-11 14:12:15 +01:00
Stephen Smoogen
522c62c273
try to make the postfix milter part better searched and some debugging to opendkim and turn off the sending of reports
2020-10-06 12:20:09 -04:00
Kevin Fenzi
c5f4e27746
roles/base/postfix: add a rdu-cc postfix main.cf
...
This one just uses the vpn endpoint for bastion to avoid dns and ipv6
issues.
Signed-off-by: Kevin Fenzi <kevin@scrye.com>
2020-10-05 16:03:55 -07:00
Pierre-Yves Chibon
8a13932c66
postfix: Drop the main.cf for pagure02 - never worked
...
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
2020-10-02 09:50:42 +02:00
Pierre-Yves Chibon
5383f87f30
pagure: adjust pagure's postfix configuration to rhel8
...
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
2020-10-01 11:06:52 +02:00
Pierre-Yves Chibon
200282de8d
pagure: add a dedicated postfix configuration file for pagure02
...
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
2020-09-25 12:10:31 +02:00
Silvie Chlupova
3ded4aae28
Fix DKIM signing
2020-09-24 10:58:17 +00:00
Mark O'Brien
1b787aef8b
add proxy39/40 to http log sync
2020-09-22 11:08:31 +01:00
Mark O'Brien
e4e6ede45b
[proxies] add proxy37/38
2020-09-01 15:45:29 +01:00
Stephen Smoogen
15348981f8
try to fix part of ticket #9273 by increasing the number of open files allowed on log servers and people as they have a large number of files to deal with.
2020-08-28 08:26:19 -04:00
Mark O'Brien
5f114a7c98
[proxies] setup for proxy35/36
2020-08-24 17:21:00 +01:00
Stephen Smoogen
25d3faff49
put in a relay host for copr
2020-08-13 14:55:18 -04:00
Stephen Smoogen
17965d6ea7
merge and remove duplicate gateway file that bastion.iad2 had. add in copr addresses to allow for relay
2020-08-13 14:53:33 -04:00
Stephen Smoogen
04efbcf732
add in correct main.cf also
2020-08-12 20:45:14 -04:00
Stephen Smoogen
c9cb4a5d5f
fix postfix entries so that they use 10.3.160.0/19 network versus phx2 networks
2020-08-12 20:42:57 -04:00
Mark O'Brien
f7ba779b61
[proxies] add proxy34
2020-08-04 15:41:04 +01:00
Mark O'Brien
6994fef4f8
[proxies] new proxy33 in aws capetown
2020-07-28 15:34:59 +01:00
Kevin Fenzi
3c340cf69b
base / resolv.conf: fix staging to adjust for iad2
...
Signed-off-by: Kevin Fenzi <kevin@scrye.com>
2020-07-18 15:46:37 -07:00
Stephen Smoogen
c1c1905ce4
fix syntax error in syncHttpLogs causing it to fail on log01. File needed } at the end of variable. Consolidated debug statements
2020-07-14 13:54:31 -04:00
Kevin Fenzi
971d49a426
base / resolv.conf / rdu: increase timeout to 5s at rdu
...
The nameserver there seems slow, it takes more than a second to resolve
things sometimes.
Signed-off-by: Kevin Fenzi <kevin@scrye.com>
2020-07-11 10:17:48 -07:00
Stephen Smoogen
5674c1e0ad
try to fix syncHttpLogs so it doesnt try to download files whcih do not exist. The rsync command has entries like speedup and data and we just want the logs
2020-07-10 17:07:22 -04:00
Stephen Smoogen
fdf96ef734
fix bug in syncHttpLogs causing them to fail
2020-07-10 09:29:41 -04:00
Kevin Fenzi
11ec8e6adf
base / resolv.conf / rdu2: vpn has to come first
...
Signed-off-by: Kevin Fenzi <kevin@scrye.com>
2020-07-06 14:10:15 -07:00
Stephen Smoogen
736b3db7d1
make the syncHttpLogs a little less noisy and hopefully more useful
2020-07-02 08:54:57 -04:00
Kevin Fenzi
7984b46eb7
The great phx2 pruning run (1st cut).
...
Since we no longer have any machines in phx2, I have tried to remove
them from ansible. Note that there are still some places where we need
to remove them still: nagios, dhcp, named were not touched, and in cases
where it wasn't pretty clear what a conditional was doing I left it to
be cleaned up later.
Signed-off-by: Kevin Fenzi <kevin@scrye.com>
2020-06-14 14:14:31 -07:00
Adam Williamson
1a3ee7c6a1
Minimize another use of blacklist
...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-06-12 09:45:20 -07:00
Stephen Smoogen
6cbe68f288
make firewall change to openshift so nagios can be accepted. make change to syncHttp for new ips
2020-06-12 12:33:13 -04:00
Stephen Smoogen
0816164593
remove proxy01.phx2/proxy10.phx2 from vpn
2020-06-10 15:44:57 -04:00
Stephen Smoogen
0f6bde6666
make it so s390 uses iad2 dns
2020-06-09 20:30:01 -04:00
Stephen Smoogen
9fbe3df30b
put the right item into the postfix main.cf
2020-06-09 14:16:22 -04:00
Stephen Smoogen
da3bb01bb8
make it so ipv4 is used for iad2 systems
2020-06-09 14:11:26 -04:00
Stephen Smoogen
d89168a30f
clean up download usage
2020-06-06 15:23:40 -04:00
Stephen Smoogen
16875c357d
try to get this to work for builders in iad2
2020-06-06 10:39:09 -04:00
Mark O'Brien
cb9302cb6a
[postfix] update gateway conf for postfix3
2020-06-02 08:16:55 +00:00
Mark O'Brien
c8e322e49a
[postfix] update main config file for postfix3 config
2020-06-02 08:16:55 +00:00
Kevin Fenzi
d5b4bef21b
iad2: bkernel01 should use the iad resolv.conf, and we shouldn't try and put template conditionals in a file.
...
Signed-off-by: Kevin Fenzi <kevin@scrye.com>
2020-05-30 18:21:39 -07:00
Kevin Fenzi
189194a7d1
iad2: fix kojibuilder resolv.conf for iad2
...
Signed-off-by: Kevin Fenzi <kevin@scrye.com>
2020-05-28 14:40:04 -07:00
Stephen Smoogen
5407472e84
move iad2 in front of vpn so that hosts aren't trying to reach vpn hosts when they aren't on vpn
2020-05-22 15:24:31 -04:00
Stephen Smoogen
d8188e7417
turn off ipv6 on bastion until we get ipv6 fulling deployed
2020-05-22 14:07:59 -04:00
Stephen Smoogen
5b9d2b927d
put in an updated postfix.main for bastion-iad01
2020-05-22 13:56:34 -04:00
Mark O'Brien
851d898e01
[rsyslog] add rsyslog8/rhel8 conf file
2020-05-21 11:37:48 +01:00
Kevin Fenzi
98549fd6db
base / resolv.conf: we want vpn to be before iad2 here
...
Signed-off-by: Kevin Fenzi <kevin@scrye.com>
2020-05-13 16:56:58 -07:00
Kevin Fenzi
c529380547
Spring cleaning time. :)
...
I removed all the old files, inventory, playbooks, roles and other from
services we no longer run or use. There was a bunch of cruft in there
and I hope that will make the repo cleaner and easier to look for things
we actually do run and care about.
Signed-off-by: Kevin Fenzi <kevin@scrye.com>
2020-05-13 14:02:41 -07:00
Kevin Fenzi
ce6cd8844a
base: postfix: comment duplicate alias_maps thats sending warnings from bastion01.iad2
...
Signed-off-by: Kevin Fenzi <kevin@scrye.com>
2020-05-08 20:30:33 -07:00
Kevin Fenzi
b8de4f9d7d
iad2: log01: add a rsyslog config file for log01.iad2
...
Signed-off-by: Kevin Fenzi <kevin@scrye.com>
2020-05-08 17:49:21 -07:00
Kevin Fenzi
29a4145466
iad2: add a iad2 resolv.conf file.
...
Signed-off-by: Kevin Fenzi <kevin@scrye.com>
2020-05-06 16:54:48 -07:00
Kevin Fenzi
9b49971cae
iad2: set prompt in iad2 to avoid confusion
...
Signed-off-by: Kevin Fenzi <kevin@scrye.com>
2020-05-06 13:51:16 -07:00
Stephen Smoogen
03a14c6db9
HOTPATCH: Fix pagure-stg email. Formal fix will need updating our postfix files to work with RHEL-8/Fedora 28+ postfix syntax.
2020-05-04 08:48:43 -04:00