sync up with nrpe 3.0.1 and nagios 4.2.4 configs
This commit is contained in:
Stephen Smoogen
parent
b261054226
commit
94e4db964a
1 changed files with 112 additions and 17 deletions
|
|
@ -2,7 +2,7 @@
|
|||
# Sample NRPE Config File
|
||||
# Written by: Ethan Galstad (nagios@nagios.org)
|
||||
#
|
||||
# Last Modified: 12-11-2006
|
||||
# Last Modified: 2016-05-10
|
||||
#
|
||||
# NOTES:
|
||||
# This is a sample configuration file for the NRPE daemon. It needs to be
|
||||
|
|
@ -11,6 +11,22 @@
|
|||
#############################################################################
|
||||
|
||||
|
||||
# LOG FACILITY
|
||||
# The syslog facility that should be used for logging purposes.
|
||||
|
||||
log_facility=daemon
|
||||
|
||||
|
||||
|
||||
# DEBUGGING OPTION
|
||||
# This option determines whether or not debugging messages are logged to the
|
||||
# syslog facility.
|
||||
# Values: 0=debugging off, 1=debugging on
|
||||
|
||||
debug=0
|
||||
|
||||
|
||||
|
||||
# PID FILE
|
||||
# The name of the file in which the NRPE daemon should write it's process ID
|
||||
# number. The file is only written if the NRPE daemon is started by the root
|
||||
|
|
@ -34,7 +50,15 @@ server_port=5666
|
|||
# and you do not want nrpe to bind on all interfaces.
|
||||
# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
|
||||
|
||||
#server_address=192.168.1.1
|
||||
#server_address=127.0.0.1
|
||||
|
||||
|
||||
|
||||
# LISTEN QUEUE SIZE
|
||||
# Listen queue size (backlog) for serving incoming connections.
|
||||
# You may want to increase this value under high load.
|
||||
|
||||
#listen_queue_size=5
|
||||
|
||||
|
||||
|
||||
|
|
@ -60,7 +84,9 @@ nrpe_group=nrpe
|
|||
|
||||
# ALLOWED HOST ADDRESSES
|
||||
# This is an optional comma-delimited list of IP address or hostnames
|
||||
# that are allowed to talk to the NRPE daemon.
|
||||
# that are allowed to talk to the NRPE daemon. Network addresses with a bit mask
|
||||
# (i.e. 192.168.1.0/24) are also supported. Hostname wildcards are not currently
|
||||
# supported.
|
||||
#
|
||||
# Note: The daemon only does rudimentary checking of the client's IP
|
||||
# address. I would highly recommend adding entries in your /etc/hosts.allow
|
||||
|
|
@ -90,6 +116,24 @@ dont_blame_nrpe=0
|
|||
|
||||
|
||||
|
||||
# BASH COMMAND SUBTITUTION
|
||||
# This option determines whether or not the NRPE daemon will allow clients
|
||||
# to specify arguments that contain bash command substitutions of the form
|
||||
# $(...). This option only works if the daemon was configured with both
|
||||
# the --enable-command-args and --enable-bash-command-substitution configure
|
||||
# script options.
|
||||
#
|
||||
# *** ENABLING THIS OPTION IS A HIGH SECURITY RISK! ***
|
||||
# Read the SECURITY file for information on some of the security implications
|
||||
# of enabling this variable.
|
||||
#
|
||||
# Values: 0=do not allow bash command substitutions,
|
||||
# 1=allow bash command substitutions
|
||||
|
||||
allow_bash_command_substitution=0
|
||||
|
||||
|
||||
|
||||
# COMMAND PREFIX
|
||||
# This option allows you to prefix all commands with a user-defined string.
|
||||
# A space is automatically added between the specified prefix string and the
|
||||
|
|
@ -111,15 +155,6 @@ dont_blame_nrpe=0
|
|||
|
||||
|
||||
|
||||
# DEBUGGING OPTION
|
||||
# This option determines whether or not debugging messages are logged to the
|
||||
# syslog facility.
|
||||
# Values: 0=debugging off, 1=debugging on
|
||||
|
||||
debug=0
|
||||
|
||||
|
||||
|
||||
# COMMAND TIMEOUT
|
||||
# This specifies the maximum number of seconds that the NRPE daemon will
|
||||
# allow plugins to finish executing before killing them off.
|
||||
|
|
@ -139,7 +174,7 @@ connection_timeout=300
|
|||
|
||||
|
||||
|
||||
# WEEK RANDOM SEED OPTION
|
||||
# WEAK RANDOM SEED OPTION
|
||||
# This directive allows you to use SSL even if your system does not have
|
||||
# a /dev/random or /dev/urandom (on purpose or because the necessary patches
|
||||
# were not applied). The random number generator will be seeded from a file
|
||||
|
|
@ -152,6 +187,66 @@ connection_timeout=300
|
|||
|
||||
|
||||
|
||||
# SSL/TLS OPTIONS
|
||||
# These directives allow you to specify how to use SSL/TLS.
|
||||
|
||||
# SSL VERSION
|
||||
# This can be any of: SSLv2 (only use SSLv2), SSLv2+ (use any version),
|
||||
# SSLv3 (only use SSLv3), SSLv3+ (use SSLv3 or above), TLSv1 (only use
|
||||
# TLSv1), TLSv1+ (use TLSv1 or above), TLSv1.1 (only use TLSv1.1),
|
||||
# TLSv1.1+ (use TLSv1.1 or above), TLSv1.2 (only use TLSv1.2),
|
||||
# TLSv1.2+ (use TLSv1.2 or above)
|
||||
# If an "or above" version is used, the best will be negotiated. So if both
|
||||
# ends are able to do TLSv1.2 and use specify SSLv2, you will get TLSv1.2.
|
||||
|
||||
#ssl_version=SSLv2+
|
||||
|
||||
# SSL USE ADH
|
||||
# This is for backward compatibility and is DEPRECATED. Set to 1 to enable
|
||||
# ADH or 2 to require ADH. 1 is currently the default but will be changed
|
||||
# in a later version.
|
||||
|
||||
#ssl_use_adh=1
|
||||
|
||||
# SSL CIPHER LIST
|
||||
# This lists which ciphers can be used. For backward compatibility, this
|
||||
# defaults to 'ssl_cipher_list=ALL:!MD5:@STRENGTH' in this version but
|
||||
# will be changed to something like the example below in a later version of NRPE.
|
||||
|
||||
#ssl_cipher_list=ALL:!MD5:@STRENGTH
|
||||
#ssl_cipher_list=ALL:!aNULL:!eNULL:!SSLv2:!LOW:!EXP:!RC4:!MD5:@STRENGTH
|
||||
|
||||
# SSL Certificate and Private Key Files
|
||||
|
||||
#ssl_cacert_file=/etc/ssl/servercerts/ca-cert.pem
|
||||
#ssl_cert_file=/etc/ssl/servercerts/nagios-cert.pem
|
||||
#ssl_privatekey_file=/etc/ssl/servercerts/nagios-key.pem
|
||||
|
||||
# SSL USE CLIENT CERTS
|
||||
# This options determines client certificate usage.
|
||||
# Values: 0 = Don't ask for or require client certificates (default)
|
||||
# 1 = Ask for client certificates
|
||||
# 2 = Require client certificates
|
||||
|
||||
#ssl_client_certs=0
|
||||
|
||||
# SSL LOGGING
|
||||
# This option determines which SSL messages are send to syslog. OR values
|
||||
# together to specify multiple options.
|
||||
|
||||
# Values: 0x00 (0) = No additional logging (default)
|
||||
# 0x01 (1) = Log startup SSL/TLS parameters
|
||||
# 0x02 (2) = Log remote IP address
|
||||
# 0x04 (4) = Log SSL/TLS version of connections
|
||||
# 0x08 (8) = Log which cipher is being used for the connection
|
||||
# 0x10 (16) = Log if client has a certificate
|
||||
# 0x20 (32) = Log details of client's certificate if it has one
|
||||
# -1 or 0xff or 0x2f = All of the above
|
||||
|
||||
#ssl_logging=0x00
|
||||
|
||||
|
||||
|
||||
# INCLUDE CONFIG FILE
|
||||
# This directive allows you to include definitions from an external config file.
|
||||
|
||||
|
|
@ -163,8 +258,7 @@ connection_timeout=300
|
|||
# This directive allows you to include definitions from config files (with a
|
||||
# .cfg extension) in one or more directories (with recursion).
|
||||
|
||||
#include_dir=<somedirectory>
|
||||
#include_dir=<someotherdirectory>
|
||||
include_dir=/etc/nrpe.d/
|
||||
|
||||
|
||||
|
||||
|
|
@ -187,6 +281,7 @@ connection_timeout=300
|
|||
# to match the argument format the plugins expect. Remember, these are
|
||||
# examples only!
|
||||
|
||||
|
||||
# The following examples use hardcoded command arguments...
|
||||
|
||||
command[check_nrpe]=/bin/date
|
||||
|
|
@ -357,10 +452,10 @@ command[service_rsyslog_restart]=/usr/bin/sudo /sbin/service rsyslog restart
|
|||
# The following examples allow user-supplied arguments and can
|
||||
# only be used if the NRPE daemon was compiled with support for
|
||||
# command arguments *AND* the dont_blame_nrpe directive in this
|
||||
# config file is set to '1'...
|
||||
# config file is set to '1'. This poses a potential security risk, so
|
||||
# make sure you read the SECURITY file before doing this.
|
||||
|
||||
#command[check_users]=/usr/lib64/nagios/plugins/check_users -w $ARG1$ -c $ARG2$
|
||||
#command[check_load]=/usr/lib64/nagios/plugins/check_load -w $ARG1$ -c $ARG2$
|
||||
#command[check_disk]=/usr/lib64/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
|
||||
#command[check_procs]=/usr/lib64/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
|
||||
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue