[id='Configuring-networking-with-nmcli']
= Configuring networking with nmcli - quick reference

[[networkmanager-status]]
== NetworkManager status

Display overall status of NetworkManager:
----
$ nmcli general status
----

Display active connections:
----
$ nmcli connection show --active
----

Display all configured connections:
----
$ nmcli connection show configured
----

[[connectdisconnect-to-an-already-configured-connection]]
== Connect/disconnect to an already configured connection

Connect to a configured connection by name:
----
$ nmcli connection up id <connection_name>
----

Disconnection by name:
----
$ nmcli connection down id <connection_name>
----

[[wi-fi]]
== Wi-Fi

Get Wi-Fi status:
----
$ nmcli radio wifi
----

Turn Wi-Fi on or off:
----
$ nmcli radio wifi _on|off_
----

List available access points (AP) to connect to:
----
$ nmcli device wifi list
----

Refresh the previous list:
----
$ nmcli device wifi rescan
----

Create a new connection to an open AP:
----
$ nmcli device wifi connect <SSID|BSSID>
----

Create a new connection to a password protected AP:
----
$ nmcli device wifi connect <SSID|BSSID> password <password>
----


== Network interfaces

List available devices and their status:
----
$ nmcli device status
----

Disconnect an interface:
----
$ nmcli device disconnect iface <interface>
----

[[create-or-modify-a-connection]]
== Create or modify a connection

To create a new connection using an interactive editor
----
$ nmcli connection edit con-name <name_of_new_connection>
----

To edit an already existing connection using an interactive editor:
----
$ nmcli connection edit <connection_name>
----

[[exampletutorial]]
=== Example/Tutorial

Create a new connection:
----
$ nmcli connection edit con-name _name of new connection_
----

It asks us to define a connection type:
----
Valid connection types: 802-3-ethernet (ethernet), 802-11-wireless (wifi), wimax, gsm, cdma, infiniband, adsl, bluetooth, vpn, 802-11-olpc-mesh (olpc-mesh), vlan, bond, team, bridge, bond-slave, team-slave, bridge-slave
Enter connection type:
----

In this example, we use ethernet:
----
Enter connection type: ethernet
----

The following message appears, note that `nmcli>` is a prompt and that it lists the main settings available:
----
===| nmcli interactive connection editor |===

Adding a new '802-3-ethernet' connection

Type 'help' or '?' for available commands.
Type 'describe [<setting>.<prop>]' for detailed property description.

You may edit the following settings: connection, 802-3-ethernet (ethernet), 802-1x, ipv4, ipv6
nmcli>
----

Edit the setting `ipv4`:
----
nmcli> goto ipv4
----

Note that after this our prompt has changed to indicate that we are currently editing the `ipv4` setting:
----
nmcli ipv4>
----

List available properties under the `ipv4` setting and describe the `method` property:
----
nmcli ipv4> describe

Available properties: method, dns, dns-search, addresses, routes, ignore-auto-routes, ignore-auto-dns, dhcp-client-id, dhcp-send-hostname, dhcp-hostname, never-default, may-fail
Property name?

Property name? method
----

Set property `method` to `auto`:
----
nmcli ipv4> set method auto
----

The `ipv4` setting is now finished. Go back to the main level. Enter the following command until the prompt looks like `nmcli>`:
----
nmcli ipv4> back
----

To list the main settings again, use the `goto` command without any arguments. After that, press `Enter` and ignore the error.
----
nmcli> goto

Available settings: connection, 802-3-ethernet (ethernet), 802-1x, ipv4, ipv6
Setting name?
----

It is possible to set a value for a property directly from the main level:
----
nmcli> set __setting__.__property__ _value_
----

For example:
----
nmcli> set connection.autoconnect TRUE

nmcli> set connection.interface-name _interface name this connection is bound to_

nmcli> set ethernet.cloned-mac-address _Spoofed MAC address_
----

Finally, check the connection details, save and exit:
----
nmcli> print

nmcli> save

nmcli> quit
----

[[manually-editing]]
=== Manually editing

To manually edit an `ifcfg` connection configuration, open or create with a text editor the configuration file of the connection located in `/etc/sysconfig/network-scripts/ifcfg-`.

A description of most common configuration options is available in the link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html/deployment_guide/s1-networkscripts-interfaces[RHEL6 Deployment Guide].

To modify a connection password, open with a text editor and edit the file `keys-` located in `/etc/sysconfig/network-scripts/`. The password is stored in plain text. For example:
----
$ cat /etc/sysconfig/network-scripts/keys-__connection name__
WPA_PSK='password'
----

Or, if using keyfile, simply edit the connection file located inside `/etc/NetworkManager/system-connections/`

Finally, save the files and to apply changes to an already active connection execute.
----
nmcli connection up id _connection name_
----

[[delete-a-connection-configuration]]
== Delete a connection configuration

Delete the connection:
----
nmcli connection delete id <connection_name>
----
Please note that this also deactivates the connection.
